Reference — Shop Floor Utilities

Machinist's Toolbox

Quick calculations for the bench and the machine.
All results are reference values — verify against your tooling and material specs.

Tap Drill Calculator
Tap & clearance drill sizes by thread engagement
Drill Selection
Calculated Tap Drill—
Nearest Standard Drill—
Actual Engagement—
Clearance — Close Fit—
Clearance — Free Fit—

75% engagement is standard for most work. Drop to 60–65% for hard materials or small taps to reduce breakage; 100% gains little strength and greatly increases tap torque.

Speeds & Feeds
Spindle RPM and table feed from surface speed & chip load
Cutting Parameters
Spindle Speed—
Feed Rate—

Presets are conservative mid-range surface speeds. Reduce for rigidity-limited setups, interrupted cuts, or deep slotting; increase with flood coolant and solid workholding.

Unit Converter
Live conversion — type in either box
⇌
⇌
⇌
— ✦ —

REFERENCE USE ONLY — FABERFACTION ACCEPTS NO LIABILITY FOR BROKEN TAPS, SCRAPPED PARTS, OR BRUISED EGOS.